Network Infrastructure

Enterprise Network Infrastructure,
Deployed Nationwide.

Structured cabling, managed switching, rack & stack, and fully documented network buildouts - delivered by certified technicians across all 50 states.

One project manager. One partner. Consistent infrastructure standards at every site.

The Problem

Infrastructure Built Without a Standard Breaks Down at Scale

When every site is different - different cabling, different switching, different vendors - the operational cost compounds across every location you add.

Inconsistent Standards Across Sites

Every location was wired by a different contractor. The result is a patchwork of cabling specs, unmanaged switches, and topologies nobody fully understands.

No Visibility Into Aging Infrastructure

Hardware from 2010 is running production workloads because nobody tracks equipment age or warranty status. Failures are reactive, never planned.

Zero Documentation at Handoff

When a contractor finishes a deployment, they leave. No as-built drawings, no port maps, no cable records. The next technician starts from scratch.

Too Many Vendors, Too Little Accountability

Separate vendors for cabling, switching, and server rooms means three phone calls and no clear owner when something goes wrong.

The Solution

One Infrastructure Standard.
Deployed Everywhere You Operate.

SRS Networks designs a repeatable network infrastructure standard - then deploys it across every site in your footprint. From the first cable pull to the final documentation handoff, you get consistent, enterprise-grade infrastructure with a single partner accountable for the outcome.

Enterprise Cat6/Cat6A structured cabling, TIA-568 certified on every run
Managed switching with VLAN segmentation, QoS, and remote monitoring
Rack & stack buildouts with structured cable management and labeling
Full infrastructure documentation: as-built drawings, port maps, cable records
Lifecycle management with equipment refresh schedules and budget forecasting
Single point of contact - one PM owns procurement, deployment, and closeout
Server rack with enterprise networking equipment in a professional data center
What your infrastructure looks like post-deployment
Cabling
Cat6A horizontal, fiber backbone, TIA-568 certified & documented
Switching
Enterprise managed PoE+, VLANs, QoS, centralized monitoring
Patching
Labeled panels, numbered ports, mapped to every device
Closets
Structured racks, managed cabling, environmental monitoring
Lifecycle
EOL tracking, refresh schedule, budget forecast delivered
Same spec. Every site.
Deployed and documented by SRS Networks
What We Deploy

Every Layer of Your Network Infrastructure

From structured cabling to server rooms, SRS Networks handles every physical and logical component of your enterprise network buildout.

Structured Cabling

Cat6 and Cat6A horizontal runs, fiber optic backbone links, and pathway systems installed to TIA-568 standards - every drop tested, labeled, and documented.

Cat6 & Cat6A copper
Single-mode & multi-mode fiber
TIA-568 certified
Full test reports included

Managed Switching & Routing

Enterprise-grade managed switches with VLAN segmentation, QoS policy, PoE+ power budgeting, and centralized monitoring. Consistent architecture at every location.

PoE+ managed switches
VLAN & QoS configuration
Layer 3 routing
Remote management ready

Rack & Stack / Server Rooms

Clean, organized network closets and server room buildouts. Proper enclosures, structured patch cabling, power distribution, and environmental monitoring.

Equipment rack installation
Cable management systems
Patch panel termination
Environmental sensors

Infrastructure Documentation

Every deployment ships with as-built floor plans, cable labeling, and full port-to-device mapping. Any technician - yours or ours - can walk in and know exactly what they're looking at.

As-built floor drawings
Port-to-device mapping
Digital record delivery
Labeled patch panels

Lifecycle Management

We track equipment age, warranty expiration, and end-of-life status across your sites so equipment refresh is planned and budgeted - never a surprise emergency.

Age & warranty tracking
EOL horizon planning
Refresh scheduling
Budget forecasting support

Network Closet Remediation

Existing environments that have grown out of control - tangled cabling, unlabeled panels, overloaded switches - cleaned up, re-documented, and brought to standard.

Cable cleanup & re-run
Panel relabeling
Switch consolidation
Post-remediation audit
The Difference

Fragmented Infrastructure vs. SRS Networks

What changes when you replace ad-hoc buildouts with a documented, standardized infrastructure managed by a single accountable partner.

Category
Fragmented Approach
SRS Networks
Cabling standard
Mixed Cat5e/Cat6, varies per site
Uniform Cat6/Cat6A, TIA-certified
Switching
Consumer & unmanaged hardware
Enterprise managed switches w/ VLANs
Patch panel labeling
Unlabeled or ad hoc
Fully labeled and port-mapped
Documentation
None or contractor left nothing
As-built drawings at every site
Troubleshooting time
Hours - reverse engineering topology
Minutes - documented infrastructure
Equipment lifecycle
Reactive - replace on failure
Planned refresh on schedule
Multi-site consistency
Each site unique per vendor/era
One repeatable standard everywhere
Point of contact
Three vendors, zero accountability
One PM, full project ownership
Our Process

How We Deliver Infrastructure at Scale

From first call to final sign-off, every SRS Networks deployment follows a structured methodology built for multi-site enterprise clients.

1

Site Survey & Baseline Assessment

Field engineers document existing cabling, pathway systems, switch inventory, and rack conditions before a single design decision is made.

2

Design, Procurement & Staging

Infrastructure is designed to your site specs, hardware is procured and QC-tested at our staging facilities, and kitted materials ship on your project schedule.

3

Certified Field Deployment

BICSI-certified technicians execute the buildout to scope - cabling, switching, rack & stack, and physical infrastructure - with daily progress reporting.

4

Testing, Documentation & Handoff

All runs are tested to TIA standards, results are logged, as-built drawings are finalized, and your team receives a complete documentation package at closeout.

BICSI & RCDD Certified Technicians
50-State Deployment Capacity
Dedicated PM Per Engagement
Regional Staging Facilities
50
States Covered
Enterprise
Grade Hardware Only
100%
Projects Documented
Single
Point of Contact

Solutions for Property Management

Network Infrastructure for Property Managers

See how SRS Networks standardizes cabling, switching, and infrastructure documentation across multi-property portfolios - from Class A office buildings to residential communities.

View Property Management Guide

Ready to Build Infrastructure
That Scales With Your Business?

Tell us about your sites, your current network environment, and your deployment timeline. Our team will put together a project plan built around your requirements.

Network Infrastructure Services | SRS Networks